The 30 series blowers are designed for tractors up to 40 HP. All four models have a 26 inch fan housing and two 11 inch diameter augers. Input RPM is 540 for all 30 Series. The 3 point hitch is Category I.

The augers are protected by a separate shear assembly. The shear bolts are located on the drive sprockets. The drive uses #50H roller chain. The fan and augers are protected by a shear assembly built into the PTO shaft. A hinged shield protects the shear assembly and the operator.

With a Lorenz Front Mount Blower Kit, our standard 3-point blowers can be fitted to the front of many newer farm tractors. The kit uses a main rail frame assembly and mount brackets for the front and rear of the tractor. The gearbox has four large spur gears to reverse and transmit the PTO power under the tractor and to the blower in front. The two lower 3-point arms are used to attach the blower to the kit, and the third link is an hydraulic lift cylinder. These kits are usually assembled to order, so they can be attached to the tractor with little preparation. The front mount kit is designed for the 30 Series and 34 Series snow blowers.

For more information about products, pricing, or your closest dealer call us toll free at 800 584-1076 or e-mail us at wilessales@wilessales.com.